Titan® 12-Turn 550 Modified Motor
The Bandit features a powerful Titan 12T 550 modified motor with internal cooling fan - an industry first for a high-performance Ready-To-Race® buggy. The Titan's oversized armature (30% larger compared to 540-sized armatures) features 12 turns of pure copper wire for big torque and increased power-handling capabilities. The integrated cooling fan lowers running temperatures for more fun behind the wheel. The Titan 12T requires very little maintenance and provides consistent torque and high speeds run-after-run, without fading. Beyond the specs, the Titan 12T is made for dirt-roosting torque, lightning-quick acceleration, big-air jumps, and just about any other 4-wheel fun that demands real horsepower.
XL-5 Waterproof Electronic Speed Control
Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC packs impressive features that are normally only found on high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, low voltage detection, Thermal Shutdown Protection, 4-7 cell NiMH and 2-cell LiPo compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. The exclusive and patented Training Mode™ profile reduces the overall power output of the XL-5 by 50%, making it easier for young or new drivers to develop their control skills before unleashing full-power.
- Innovative watersealed design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode™ - 50% forward / brake / 50% reverse (patented)
- 12-turn motor limit for 550 size motors
- 15-turn motor limit for 540 size motors
- Integrated on/off switch
- Traxxas EZ-Set® one-button setup
- LiPo and NiMH compatible with two-stage low-voltage detection
- High-efficiency MOSFET transistors
Traxxas 4-amp DC Peak Detecting Fast Charger
Bandit includes a 4-amp peak detecting charger for quick, convenient, hassle-free charging. The charger uses a 12-Volt DC power outlet for charging charging in the field. The brilliant LED provides charging status while the battery charges. The peak-detecting charger is optimized for charging Traxxas Power Cell NiMH battery packs. Just plug the included Power Cell battery in for a perfect charge, run after run.
Traxxas Power Cell NiMH Battery with iD™
Bandit includes a genuine iD-equipped 3000mAh, 8.4V, Power Cell NiMH battery to make sure you experience all the performance that’s been engineered into your Traxxas model. Accessory Traxxas iD chargers (sold separately) auto-detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity. Power Cell packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and Traxxas’ high-output, gold plated, patented, High-Current Connectors. Precision assembly with attractive, individually wrapped cells and clear overwrap complete the Traxxas Power Cell package. For even greater speed and runtime, a full line of optional Traxxas iD Power Cell NiMH and LiPo batteries are available. Power Cell batteries are Traxxas certified to maximize the performance and speed engineered into every Traxxas vehicle.
Traxxas High-Current Connector
The patented Traxxas High-Current Connectors funnel maximum power to your vehicle’s electronics. Traxxas High-Current Connectors let you get the quickest, safest charge for your battery so you can unleash the maximum power and runtime for your Traxxas vehicle.
Precision 2.4GHz Control
Switch on the power and drive! That's all there is to it with the TQ™ 2.4GHz radio system. There are no frequencies to manage, so the focus is on having fun. Race multiple vehicles side by side without interference. The TQ's advanced programming provides long-range control with smooth, glitch-free performance. The TQ's ergonomic design is comfortable for all day driving with an internal antenna that is impervious to damage.
3-channel Micro Receiver with Fail-Safe Security
The TQ 2.4GHz micro receiver fits easily into almost any vehicle, and features dual channel-1 steering outputs. The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is conveniently built-in and does not need to be set or activated.
Waterproof Receiver Box
Bandit's innovative waterproof receiver box allows easy access to the receiver for maintenance. The unique patented design holds a 3-channel micro receiver that saves weight and provides reliable, long-range RC performance.
High-Torque Waterproof Steering Servo
A high speed race buggy needs a powerful steering servo for responsive performance, and Traxxas delivers with the #2056 high-torque servo. This waterproof steering servo uses O-ring seals to keep the fun going when things get wet. Waterproof for all-weather action, the #2056 provides 80 oz-in of steering muscle. That's twice the power of typical "standard" servos.
Securely Mounted Electronics
The ESC and watertight receiver box are screwed to the chassis for ultimate mounting security. There's no servo tape to loosen over time with dirt, heat, and collisions.
Torque-Control™ Slipper Clutch
The Torque-Control slipper clutch uses special semi-metallic friction pads and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on, run after run. Spur gears remove and replace easily without altering the slipper adjustment.
Alias™ Tires and Tracer™ Wheels
The Bandit rides on stylish 2.2" Tracer™ mirror-chrome five-spoke wheels with pre-glued tires and foam inserts. Alias™ step-pin rear tires and ribbed front tires keep the Bandit firmly planted on extreme off-road terrain.
The industry standard 2.2" Tracer wheels accept a wide array of accessory tires including the Traxxas Anaconda 2.2" street tires for Bandit and other buggies.
Anaconda 2.2" Tires (sold separately)
Transform your Bandit into a menacing street machine with available Anaconda 2.2" street treads. These sticky, high-traction tires offer aggressive handling on paved surfaces. This proven design features large tread blocks to provide incredible grip and long-wearing performance. Buy them pre-glued and ready to install for instant on-road action.
Included Optional Pinion Gear
The Bandit reaches its blistering 35+mph top speed on-road using the optional 31-tooth pinion gear (included) and a 7-cell 8.4V battery pack (sold separately). Out of the box, the installed 21-tooth pinion gear is just right for all-around, on or off-road action.
The Bandit's fully trimmed and painted ProGraphix bodies turn heads everywhere they go with their stunning looks and bold paint designs. Decals come pre-applied to save you time and get you driving just minutes out of the box. Traxxas' ProGraphix bodies are the hottest looking bodies around and are only available on Traxxas Ready-to-Race® models.
Oil-Filled Ultra Shocks™
Bandit's oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and silky-smooth performance. They are easy to customize with a wide range of high-performance oils, springs, and pistons available. Features include pressure bladders for air/oil separation and spring clips to change precisely the ride height and spring pre-load tension. If their performance ever fades, refresh them in minutes with our inexpensive rebuild kits.
Powder Coated White Springs
White springs are race-tuned for more responsive handling and the long-lasting, white powder coated finish sets Bandit apart from the pack.
Motor Mount with Cooling Channels
The sealed gearbox protects the transmission components from dirt and rocks. The molded motor plate includes finned cooling channels where the motor mounts to the motor plate. The cooling channels work in conjunction with the internal Titan 12T motor fan to pull air through the motor for superior cooling.
Brushless Ready Magnum 272™ Transmission
The Bandit's Magnum 272 transmission features metal gears riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power transfers quietly to the durable telescoping U-joint driveshafts. The sealed gearbox protects the transmission components from dirt and rocks. Best of all, the Magnum 272 is built Traxxas Tough™ to handle massive brushless power without the need for costly upgrades.
Brushless Ready Planetary Gear Differential
The Traxxas planetary gear differential uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding power to the wheels.
A 35+mph buggy needs a sophisticated steering design to provide razor-sharp handling and accurate steering response. The Bandit’s high-performance bellcrank steering system minimizes bump steer to increase cornering stability.
Slider driveshafts are extremely durable and allow greater articulation for increased suspension travel.
Fiber Composite Arms
Proven suspension geometry with solid, durable camber links takes the guess work out of set-up. Both ends are captured to keep you on the track even when the going gets rough. Captured rod ends provide unmatched durability and won't pop off unexpectedly.
MODEL 24054-1: Fully assembled, waterproof, Ready-To-Race®, with TQ™ 2.4GHz radio system, XL-5® Electronic Speed Control, 8.4V NiMH 3000mAh Power Cell™ battery, 4-amp DC Peak Detecting Fast Charger, and ProGraphix® painted body.
* With 7-cell battery and included optional 31-tooth pinion gear.