Radio system: Not compatible with the stock SCX24 / SCX30 radio systems. Requires a new transmitter and receiver (with CH2).
No app support. Drag brake can be adjusted via the AUX channel.
Motor Support: 030/050/130/180 Brushed Motors (PH2.0 Connector), not compatible with 370-size motors.
Please use 2S LiPo! (Using 3S may trigger the voltage protection function and cause automatic shutdown.)
Features:
1. IP67 waterproof design Fully waterproof design to adapt to various climate conditions.
2. Linear Throttle Control An optimized control algorithm ensures consistent linear throttle response.
3. AUX Mapping Function Drag brake force is adjustable via the AUX channel.The signal range of 1000–2000μs corresponds to 0–100% drag brake force.
Plug the AUX wire into CH5. A knob channel is recommended if available.
Use the CH5 knob to adjust the Drag brake directly
4. Multiple protections:
Low Battery / Undervoltage Protection: Issues a warning and limits power output when the battery voltage drops below the set threshold.
Overheat Protection: Issues a warning and cuts off power output when the ESC temperature reaches the preset limit.
Overvoltage Protection: Issues a warning and significantly limits or cuts off power output when the input voltage exceeds the ESC’s rated voltage range.
Throttle Signal Loss Protection: Applies braking immediately when the receiver’s PWM signal continuously deviates from the normal range or is lost, preventing a runaway condition.
Specifications:
Model: MB100 NANO
Continuous / Peak Current: 15A / 40A
Motor Support: 030/050/130/180 Brushed Motors (PH2.0 Connector)