INJORA +4.5mm Planet Axles with Double Joint Shafts for 1/30 SCX30

INJORA +4.5mm Planet Axles with Double Joint Shafts for 1/30 Axial SCX30

Note:

• If using stock SCX30 chassis links with INJORA planet axles, replace the original ball studs with those included in the axle kit, as the screw length differs.
• Use a small amount of blue threadlocker, such as 222/242/243, on metal-to-metal screws, and make sure the steering knuckles move smoothly.

Features:

• Integrated axle housing with planet-shaped differential cover
• Scale-proportioned axle tubes designed for a more realistic and balanced look
• Upgraded stainless steel double joint axle shafts allow up to 52° steering angle
• +4.5mm per side track width improves stability while maintaining scale proportions
• 2/13T front and 2/16T rear gears create front overdrive for improved climbing traction and steering control
• Brass steering knuckles and steering links add front-end weight for improved climbing performance
• Retaining springs at each joint help keep the joint pins secure and reduce the risk of them backing out during high-angle steering
• Custom-designed compact M2 wheel nuts specifically for SCX30 ensure secure wheel mounting

Specifications:

• Part Number: SCX30-34BKFR
• Housing Material: Aluminum
• Steering Links Material: Brass
• Steering Knuckles Material: Brass
• Gears & Shafts Material: Stainless Steel
• Shaft Type: Double Joint
• Gear Ratio: 2/13T (Front), 2/16T (Rear)
• Maximum Steering Angle: Approx. 52°
• Overall Length: 78.4mm
• Front Axle Weight: 27.8g
• Rear Axle Weight: 11.4g

Installation Tip: SCX30 uses very small hardware. Use the correct-size driver and light pressure. Tighten only until the screw is seated and snug, then stop. If you feel resistance before it is seated, or if the screw does not thread smoothly, stop and check the alignment before continuing.

Package List:

• 1 × Front Axle
• 1 × Rear Axle
• 1 × Torx Screwdriver
• 1 × Nut Tool (Brass)
• 4 × Custom M2 Nuts
• 1 × Assembly Manual