INCLUDES |
REQUIREMENTS |
Unleaded gasoline
Two-stroke oil
4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
(separate receiver style pack can be used) (LiPo & LiFe requires
voltage regulator)
Propeller
SPECIFICATIONS |
Displacement: 84.88cc (5.18 cu in)
Bore: 2.047in (52mm)
Stroke: 1.574in (40mm)
Total weight: 5.09lb (2.31kg)
Engine: 68oz (1930g)
Exhaust: 8.8oz (250g)
Ignition module: 4.58oz (130g)
Output: 8.5hp @ 7500 rpm
Compression ratio: 9.5:1
Gasoline/Oil Mix: 30:1
Suggested props: 25x10, 26x9, 27x8
Height, Crankshaft Center/top of Cylinder Head: 5.5" (140mm)
Length, Prop Washer to end of Mount: 7.9" (200mm)
Center of Vertical Mounting Holes: 2.9" (75mm)
Center of Horizontal Mounting Holes: 3.9" (100mm)
Mounting Hole Diameter: 0.20" (5mm)
COMMENTS |
The DLE-85 uses the CM6 spark plug (DLEG5626).
To avoid permanent damage to the electronic ignition system, NEVER
turn engine over with the system switched on and the plug not
installed.
Thanks for subscribing!
This email has been registered!