-
Traxxas Brake Disc/Shaft to Disc Adapter (4185)
Product Compatibility: Nitro Rustler Nitro Stampede- $4.99
- $4.99
- Unit price
- per
-
Traxxas Bulkhead tie bars, front & rear (blue-anodized aluminum)/ 2.5x6 CS (1) (7023)
Product Compatibility: TRA71054-8 TRA71076-8 TRA70054-8 TRA72054-5 Front and rear blue-anodized aluminum bulkhead tie bars with 2.5x6 mm screw- $8.99
- $8.99
- Unit price
- per
-
Traxxas Cone, Split Beveled (3281)
Product Compatibility: Jato Nitro Rustler Nitro Slash Revo Slayer Pro 4X4 T-Maxx TRX 2.5R TRX 3.3 TRX Pro .15 TRX Pro .15 Marine- $4.99
- $4.99
- Unit price
- per
-
Traxxas E-Clips, 1.5mm (24) (5150)
Product Compatibility: 1/16 E-Revo RTR W/ESC 1/16 E-Revo VXL RTR W/TSM 1/16 Slash 4WD RTR W/ ESC E-Revo 2 Jato 3.3 W/2.4GHz Radio Revo 3.3 4WD Nitro Monster Truck Slayer Pro 4X4 RTR W/TSM Summit 4WD Electric Monster Truck T-Maxx 3.3 RTR W/2.4GHZ Radio...- $2.99
- $2.99
- Unit price
- per
-
Traxxas E-clips/ C-Rings (1633)
Product Compatibility: 2017 Ford Raptor Jato Nitro Rustler Nitro Slash Nitro Revo Rustler Slash RTR Slash RTR w/OBA Slash VXL w/OBA & TRM Slash VXL Slayer Pro 4x4 RTR w/TSM Stampede VXL RTR T-Maxx 3.3 RTR T-Maxx RTR w/TQ Radio- $3.99
- $3.99
- Unit price
- per
-
Traxxas ECM-2.5 Electronic Control Module, waterproof (low voltage detection, fwd/rev/brake) (9785)
Product Compatibility: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender® ECM-2.5™ features low voltage detection for 2s LiPo batteries and EZ-Set® one-button programming to select driving modes. Choose Sport Mode for all-around driving, or Trail Mode for smooth drag braking on steep descents. For a...- $49.99
- $49.99
- Unit price
- per
-
Traxxas Foam Air Filter (4060)
Product Compatibility: TRX Pro .15 Nitro Stampede Accessory part for these models: TRX Pro .15 Marine- $8.99
- $8.99
- Unit price
- per
-
Traxxas Gaskets, cooling head: 0.20, 0.30, 0.40mm (5292)
Product Compatibility: Cooling head gaskets: 0.20, 0.30, 0.35 mm (1 each) for TRX® 3.3 engines.- $3.99
- $3.99
- Unit price
- per
-
Traxxas Glow Plug Wrench (3980)
Product Compatibility: Bandit Jato Nitro Rustler Nitro Slash Revo Slayer Pro 4X4 Summit T-Maxx Accessory part for these models: E-Revo® VXL Brushless TRX 2.5R TRX 3.3 TRX Pro .15 TRX Pro .15 Marine- $3.99
- $3.99
- Unit price
- per
-
Traxxas Handle (replacement for #3415 tool kit) (3416)
3416: Handle (replacement for #3415 tool kit)- $10.99
- $10.99
- Unit price
- per
-
Traxxas Hardware kit, complete (contains all hardware used on 1/18-scale Ford® Bronco® or Land Rover® Defender®) (includes clear plastic storage container) (9746)
Hardware kit, complete (contains all hardware used on 1/18-scale Ford® Bronco® or Land Rover® Defender®) (includes clear plastic storage container) Replacement part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®- $24.99
- $24.99
- Unit price
- per
-
Traxxas Hardware kit, stainless steel, complete (9746X)
Hardware kit, stainless steel, complete (contains all stainless steel hardware used on 1/18-scale Ford Bronco or Land Rover® Defender®) (includes body hardware and clear plastic storage container) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®- $32.99
- $32.99
- Unit price
- per
-
Traxxas Hardware kit, stainless steel, Sledge (9592X)
Product Compatibility Sledge® Give your Sledge a complete upgrade with this stainless steel hardware kit. The all-inclusive kit replaces all the standard hardware on your Sledge with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection...- $49.99
- $49.99
- Unit price
- per
-
Traxxas Hollow Balls, Steel (machined) (7028X)
Product Compatibility 1/16 E-Revo® Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Increase precision and extend wear with these fully machined steel balls for 1/16...- $10.99
- $10.99
- Unit price
- per
-
Traxxas LaTrax Rally Screw Set (7543X)
Product Compatibility: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Rally VR46 1/18 SST 1/18 LaTrax® Teton- $6.99
- $6.99
- Unit price
- per
-
Traxxas Motor Mount Hinge Post/ Fixed Gear Adapter (8661)
Product Compatibility: E-Revo® VXL Brushless / 5x25mm BCS (1)/ 4x16mm CS with split and flat washer (1)- $4.99
- $4.99
- Unit price
- per
-
TRAXXAS Motor Mount Screws(TRA9591)
Replacement Sledge® motor mount screws- $3.99
- $3.99
- Unit price
- per
-
Traxxas Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1) (for installation of #3481 or #3483 motor into Maxx® or Maxx® Slash® (8960X)
Product Compatibility: Maxx Maxx Slash New front and rear motor mounts allow you to install the powerful 3481 Velineon® 6s 2200 kV brushless motor in your Maxx®. (3481 motor also requires VXL-6s ESC)- $10.99
- $10.99
- Unit price
- per
-
Traxxas Mounting Plate, Electronic Speed Control (3725R)
Product Compatibility: Bandit VXL Bandit Rustler® VXL Rustler® (for installation of XL-5/VXL into Bandit or Rustler®)- $4.99
- $4.99
- Unit price
- per
-
Traxxas Nuts 4MM Flanged Lock Orange (1747T)
Product Compatibility: BIGFOOT® No. 1 Officially Licensed Replica Drag Slash 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica DCB M41 Widebody Ford® F-150 Raptor Jato® Nitro Rustler® Nitro Slash Rustler® 4X4 Rustler® VXL...- $9.99
- $9.99
- Unit price
- per