-
Traxxas Stub Axles, Front, Heavy Duty (2)/ Yokes (2)/ Pins (4) (6854X)
Product Compatibility: Ford Fiesta® ST Rally Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Telluride 4X4 -
Traxxas Stub Axles, Rear (2) (2753X)
Product Compatibility: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Craniac® Ford F-150 Raptor Ford Raptor Nitro Rustler Nitro Sport Nitro Stampede Rustler VXL Rustler Skully Slash Stampede VXL Stampede -
Traxxas Stub Axles, Rear, Heavy Duty (2)/Pins (2) (6853X)
Product Compatibility: Ford Fiesta® ST Rally Nitro Slash Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Stampede 4X4 Unassembled Kit Stampede 4x4 VXL Stampede 4x4 Telluride 4x4 Accessory part for these models: Bigfoot® No. 1 Officially Licensed... -
Traxxas Stuffing Tube (5725)
Product Compatibility: DCB M41 Widebody Spartan This is a replacement Traxxas Stuffing Tube, and is intended for use with the Traxxas Spartan. -
Traxxas Suspension arms, front (upper (2)/ lower left (1)/ lower right (1)) (10731)
Product Compatibility: MINI MAX -
Traxxas Suspension arms, rear (upper (2)/ lower left (1)/ lower right (1)) (10730)
Product Compatibility: MINI MAX -
Traxxas Tires, Anaconda® 2.2" (wide, front) (2)/foam inserts (Bandit) (soft compound) (2479)
Product Compatibility: Bandit VXL Bandit -
Traxxas Toe links, front (molded composite) (2)/ hollow balls (4) (61mm center to center) (10742)
Product Compatibility: MINI MAX -
Traxxas Toe links, front (TUBES blue-anodized, 7075-T6 aluminum (7897X)
Product Compatibility: XRT® X-Maxx® Ultimate X-Maxx® XRT® XRT® Ultimate Toe links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895X X-Maxx® WideMaxx® suspension kit) 188 mm TUBES aluminum toe links for X-Maxx® WideMaxx® kits are lighter than steel and stronger... -
Traxxas Transmission, Complete (fits 1/16-scale brushed models) (7095)
Product Compatibility: 1/16 E-Revo® 1/16 Slash 4WD Transmission, complete (fits 1/16-scale brushed models) -
Traxxas TRX-4 Differential Ring & Pinion Gear (8279)
Product Compatibility: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport High Trail... -
Traxxas TRX-4 Long Arm Lift Kit Center Driveshaft Extension Kit (8150)
Product Compatibility: TRX-4® 1979 Chevrolet Blazer TRX-4® Equipped with Traxx™ TRX-4® Ford Bronco TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit This is a Traxxas Center Driveshaft Extension Kit, compatible with any Long... -
Traxxas TRX-4 Plastic Center Half Shaft Set (8250)
Product Compatibility: TRX-4® 1979 Chevrolet Blazer TRX-4® Equipped with Traxx™ TRX-4® Ford Bronco TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6™ Mercedes-Benz® G 63® AMG 6X6  -
Traxxas TRX-4M High/Low 2-Speed Transmission (9891)
A New Level of Crawling CapabilityAdd enhanced crawling capability to your TRX-4Mâ„¢ with the new High/Low 2-speed transmission. The manually selectable unit adds a low gear option for incredible rock-crawling torque, while keeping the standard high gear ratio for general driving. The transmission comes... -
Traxxas U-Joints (2)/ 3mm Set Screws (4) (1539)
Product Compatibility: Modified U-joints specific to the Villain EX. Not for use with original Villain, Nitro Vee, or Blast. -
Traxxas U-joints, Driveshaft (carrier) (4) (5452X)
Product Compatibility: E-Revo® VXL Brushless Revo Slayer Pro 4X4 T-Maxx -
Traxxas Unlimited Desert Racer Front/Center Differential Carrier Case (8581)
Product Compatibility: Unlimited Desert Racer This is a replacement Traxxas Unlimited Desert Racer Differential Carrier Case for use in the front and center positions. This set also includes two x-ring gaskets, one ring gear gasket and two 14.5x20 shims. Includes (Carrier, differential (front or... -
Traxxas Wheel Adaptors, 12mm Hex, 6061-T6 Aluminum (blue-anodized) (6869)
Product Compatibility: Rally Slash 4X4 Platinum Stampede® 4X4 Unassembled Kit Stampede® 4X4 Telluride 4X Wheel adaptors, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pins (4)/ drill bit, 0.25 inch (for 6mm shafts) (requires #6451 (x2), #6452 (x2), #6439, #6455, #5117 (x3)) -
Traxxas Wheel Hubs (7669)
Product Compatibility: 1/18 LaTrax® Desert Prerunner 1/18 SST 1/18 LaTrax® Teton -
Traxxas Wheel Hubs, 12mm Hex (2)/ Stub Axle Pins (2) (steel) (8269)
Product Compatibility: TRX-4® 1979 Chevrolet Blazer TRX-4® 1979 Ford Bronco TRX-4® Equipped with Traxx™ TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6™ Mercedes-Benz® G 63® AMG 6X6