iFlight Alpha C85 Analog w/Runcam Nano2 Camera C009*666

The long requested BNF is finally ready for everyone! Our converted Alpha C85 in a popular CineWhoop pusher configuration for a Insta360 or naked GoPro Hero to shoot the most insane footage ever. Camera and camera case not included but sold separately!

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features：

• Pusher configuration style frame kit
  
• Butter smooth XING1303 5000KV for more torque and efficiency with longer flight times compared to 11xx motors 
• Camera and batteries are placed on the top of the drone for better CG and better control
• Universal camera mount for various cams and insane footage
  
• Pre-tuned with smooth cinematic settings

Alpha C85 Analog BNF Specs:

• SucceX-D 20A Whoop F4 AIO Board
• XING 1303 5000KV FPV Micro Motor
• Wheelbase: 85mm
• Body size: 60*60mm
• Ducted propeller size: 2 inch (85mm)
• FC pattern: 25.5*25.5mm
• FPV cam spacing: 14mm
• Weight: 103.2g (without battery)
• Flight time cruising incl. naked Hero8: 3-4 min (4S 450mAh), 5-6min (4S 650mAh)

PRE-TUNED & PRE-SETUP:

• - Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Alpha C85 Analog Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1x Alpha-C 85mm Frame
• 1x Runcam Nano2 Camera
• 1x 5.8G SucceX Micro Force VTX 300mW
• 1x Albatross RHCP ipex 5.8g light antenna
• 2sets HQ 2 inch 4-blades (each 4 props - Color May Vary)
• 1x iFlight Lipo Strap

FC // SucceX-D 20A F4 Whoop AIO

• *Size：30.5*30.5mm
• *Mounting pattern：25.5*25.5mm/φ3mm
• *Connector：Micro-USB
• *MCU：STM32F411
• *Gyro：MPU6000
• *Blackbox：8MB
• *BEC output：5V 2A
• *INA pad：UART2 (nR2) 
• *Barometer：no
• *Constant current：20A，25A（Burst）
• *Input：2-4S
• *Current sensor：yes
• *BLHeli：BLHeli-S
• *ESC Telemetry：no
• *Target：IFLIGHT_F411_PRO
• *ESC Firmware：G-H-30 BLS

5.8GHz SucceX Micro 300mW VTX

• -Power: PIT/25/100/200mW/300mW
• -Antenna interface: IPEX (UFL)
• -VTX protocol : IRC Tramp
• -Size: 13.5x14.5mm
• -Weight: 1.4g
• - Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g