Fees products

Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4) Aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx® chassis. Includes 4x18 mm screws (4).

Aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx® chassis. Includes 4x18 mm screws (4).

Product Compatibility: Blast WATER COOLING KIT: Water cooling is a highly recommended upgrade for the Blast, and mandatory if aftermarket motors are used. The cooling system consists of tubing which picks up water from underneath the boat, circulates it through coils wrapped around the...

Product Compatibility: Ford F-150 Raptor  4-TEC 2.0, Ford GT  4-TEC 2.0, Ford Mustang GT  Bandit VXL RTR w/TSM E-Revo 2 Rustler 4X4 Brushless Rustler VXL RTR w/TSM Slash 4X4 1/10 Scale VXL 4WD OBA & TSM  Slash 4X4 1/10 Scale 4WD TSM Slash 4X4...

Product Compatibility: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit

Product Compatibility: Rally Slash 4X4 Platinum Stampede® 4X4 Unassembled Kit Stampede® 4X4 Telluride 4X Wheel adaptors, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pins (4)/ drill bit, 0.25 inch (for 6mm shafts) (requires #6451 (x2), #6452 (x2), #6439, #6455, #5117 (x3))

Product Compatibility: X-Maxx®

Product Compatibility: 1/18 LaTrax® Desert Prerunner 1/18 SST 1/18 LaTrax® Teton

Product Compatibility: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Chevrolet® Corvette® Stingray Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® GT Ford® Mustang GT® Toyota® GR Supra GT4® Set of four wheel hubs replicate disc brake rotors...

Product Compatibility: TRX-4® 1979 Chevrolet Blazer TRX-4® 1979 Ford Bronco TRX-4® Equipped with Traxx™ TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6™ Mercedes-Benz® G 63® AMG 6X6

Product Compatibility: BIGFOOT® 4X4 Brushless Officially Licensed ReplicaFord® F-150® Raptor R™ 4X4Ford® Fiesta® ST Rally BrushlessFord® Fiesta® ST RallyJato® 4X4 BrushlessJato® 4X4 VXLRustler® 4X4 BrushlessRustler® 4X4 VXLSlash® 4X4 BrushlessSlash® 4X4 VXL EHDStampede® 4X4 BrushlessStampede® 4X4 VXLAccessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

Product Compatibility: 1/18 Ford® Bronco® 1/18 Land Rover® Defender® Wheel hubs, 7mm hex (4)/ axle pins (8) Set of four composite 7 mm wheel hubs with axle pins (8)

Wheel hubs, 7mm hex (steel) (4)/ axle pins (8) Set of four 7 mm steel wheel hubs increase strength and add valuable ounces to the lowest part of your TRX-4M™ for improved anti-rollover stability. Includes axle pins (8) Accessory part for these models: 1/18 Ford®...

Product Compatibility: Rustler® 4X4 VXL Jato Rustler® 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4

Product Compatibility: Maxx®

Product Compatibility: Slayer Pro 4X4 T-Maxx Accessory part for these models: Revo T-Maxx

Product Compatibility:  X-Maxx®

Product Compatibility: 1/16 E-Revo VXL 1/16 E-Revo 1/16 Mustang 1/16 Race Truck 1/16 Rally 1/16 Slash 4WD 1/16 Summit VXL 1/16 Summit

Product Compatibility: Unlimited Desert Racer